Integrated CO2 Soda Cylinder Filling module.
Our 4 point integrated module fills by scale and metering device thus ensuring accurate filled mass.
Filling station features;
Our CO2 Cylinder Filling Modules system is built on a single frame skid mounted including the control cabinet. Control system Siemens PLC with HMI for parameter and operation overview. Each Fill head equipped with:
- Loadcell legal
- Fill, Vent valve, pressure transmitter
- Working pressure: 70 Bar
- Test pressure: 110 Bar
- 4 adaptors (one for each filling head) are included to be used for filling special cylinders.
Typical Cylinder specification (others available):
Volume 0,6 lt
- Tare Weight approx: 800 g.
- Fill Weight: 425 g (+25 g / -13 g).
- Diameter: 60 mm +/- 0,5 mm
- Length: 360 mm +/- 10 mm
Valve types:
- Standard Soda Valve ACME Thread TR 21 x 3,5
- Soda stream Valve Type N / Penguin / Disc Type
Typical process steps:
Example Unit for our CO2 SODA Stream Cylinder Filling system consists of 4 off fill heads manually loaded by operator. After closing safety shield filling process starts automatically.
Process steps:
- Cylinder clamp.
- Check for residual pressure.
- Flush with CO2 by time (Optional, just open fill valve for time x).
- Cylinder vent.
- Tare check (weight must be in a range).
- Fill cylinder by weight.
- Final weight check.
- Vent or re-dose in case of over / under filling.
- Unlock safety shield.
- Load on the side head for leak test.
- Press leak test start push button.
- Leak test green, removes the cylinder
Production capacity (4 bay module): Circa 250 pcs per hour